Rca universal remote control user manual

Refer to. If you release the device key any time during the Direct. The last programmed code under. Test the remote with the device to make sure the device. NO, it blinked four times and turned off: You have. Try step 3. Manually turn on the device you want. Point the remote directly at the front panel of the device you. The remote is testing a single code for your device. TIP: Because there are so many codes, you may have to.

Throughout the programming of each key, keep the remote. During the Manual Code Search, the remote ignores. Repeat the Manual Code Search from the beginning. If you used one of the Code Search methods to. Retrieving the actual code and writing. If the codes are recorded, you can use the. Direct Entry method to reprogram your remote to control your. Press and hold the device. Because this remote controls more than one device, you.

That means, if you wish to operate your TV, you. The remote stays in that device mode until you. For example, if your remote is. Problem: The remote does not operate your device. This tells the remote which device to operate. There must.

Move closer and make sure you point the remote. Once programmed successfully,. To obtain repair or replacement within the terms of the warranty , the product. For the location of the nearest warranty station to you, call toll-free to. This Warranty does not cover product purchased, serviced or used outside. This Warranty is not transferable and does.

This Warranty is in lieu of all other express warranties or liabilities. No person or representative is authorized. T our of the Remote. Note: If you press an invalid key during the Code Retrieval.

If you do not press a. The CHAN keys also provide skip forward and skip back. Backlight illumination helps you see the remote control keys. You can turn backlight illumination on by. Backlighting stays on as long as. While holding the device key down, press and hold the. Release both keys. Curtis Mathes Hello Kitty MB Quart Nexus Electronics Sheng Chia America Action American High Harley Davidson Hughes Network Systems Instant Replay Polk Audio Bel Canto Design Blue Parade California Audio Labs Diamond Vision Go Video Sonic Blue Theta Digital Urban Concepts Bell ExpressVu General Instrument Next Level Star Choice Bright House Cable One Time Warner Toshiba , , , , , White Westinghouse Pressing Play or Slow again will tell the remote to try the next batch of codes.

Repeat this every five seconds until the device turns off. Press the Reverse or Skip Back button once the device turns off. This should turn it back on again. You may have to press this multiple times to find the correct code. Press Stop or OK to lock in your code. Once the device turns back on after pressing the Reverse button, you've found the correct code.

Press Stop to lock it into your remote. Make sure you are keeping the remote pointed at the device, and that you follow each step exactly. Method 3. Start by turning on the device you want to control. Universal remotes only work with devices that support remote control in the first place. If the device didn't originally come with a remote, you won't be able to use a universal remote with it. Point the remote at the device you want to control.

You'll need to keep the remote pointed at the device as you program. Press and hold the Code Search button until the light turns on. This button is usually at the top of the remote. When the light comes on, you can let go of the button. Press and release the device button that corresponds with what you want to control.

The light will blink and then remain lit. Press and release the Power button on the remote until the device turns off. Each time you press and release the Power button, the remote will try a different code for the device. Once the correct code is found, the device will receive the signal and turn off. This could take a while if the code for your device is at the end of the remote's internal list. There are a couple hundred codes that you may need to go through.

If you go through the whole list without finding a matching code, the light on the remote will blink four times and then shut off.

There's a good chance that the remote will not work with your device, since you've tried every code available. Press Enter on the remote when the device turns off. This locks the code into your remote. If you accidentally moved past the correct code, you'll have to start the search again. If the code was successful, you should be able to turn the device on and off using the remote.

Make sure you've pressed the correct device button at the top of the remote before testing the features. Not all functions may be available on the universal remote. Your remote may have limited functionality compared to the device's original remote.

Retrieve the code. After you've locked in the code, write it down so that you can enter it easily in the future. Press and release the device button for the locked code you want to retrieve.

Press and release the Code Search button. Press the number keys in order, starting with 0. When the light comes on, this indicates the first digit. Start over at 0 and repeat until you have all three digits. TVs, even from the same brand, use different codes. You will have to find your model number and search online to find the codes.

Not Helpful 23 Helpful Use the code search function explained in this article or look in the owner's manual for the DVD player. Not Helpful 9 Helpful Make sure you are using the correct device code. If you're unable to locate the code, try doing a code search with your RCA remote. Not Helpful 7 Helpful See whether the battery needs to be replaced.

Some of the buttons don't work because you need to replace the battery. If it's still not working after that, it would probably be best to just buy a new remote.