How to connect canon printer to wifi router

Run the printer troubleshooter. The password is the printer serial number. The printer serial number is printed on the sticker attached on the printer.

It consists of 9 alphanumeric characters four alphabets followed by five numbers. Check1 Make sure that the printer is turned on. Check2 Make sure that the Wi-Fi lamp is lit on the front side of the printer. To do this, power down the printer and then unplug the power cord from the wall. Wait for a minute, then plug the printer back in and power it back up.

Wait for the cartridges to center, and then try printing again. If your issue persists, you can also try resetting the printer to the default or factory settings. The printer may not be recognized if you install the printer driver with the printer turned ON. Delete the USB class driver when it is not possible to install the printer driver correctly when using a USB connection.

Check1 Check the power status of printer and other devices wireless router, PC, smartphone, or tablet. Turn on the printer or devices.

If the power is already turned on, turn it off and on again. To use your printer over a wireless connection, your wireless router must already be set up. In order to confirm whether the computer to be used with the printer is connected to the network, try to browse the Internet website from the computer.

For information regarding your wireless router's setup method and functionality, refer to its instruction manual or contact its manufacturer. Regarding the setup method of the computer, refer to the instruction manual for the computer you are using, or contact its manufacturer. Cause and Solution. Standard setup connection. See[ How to connect the printer to a wireless router using "cableless setup" ].

Start a New Discussion. I don't have the cable for the wirless wifi brother printer and got a new router nighthawk X6 AC It seems the only way to connect is through a USB port. Is there a way to configure it wirelessly without the USB cable? Go to Solution. You should be able to connect your printer to the Wi-Fi network by using the controls on the printer.

View solution in original post. If you're having trouble connecting to Wi-Fi, it may be because your printer isn't connected to your computer. If your printer has a touchscreen, you can use its wireless setup wizard tool to connect it to Wi-Fi.

Here's how:. This method lets you connect to a wireless network even if you don't know its name. Just make sure you have your wireless router handy to complete these steps. Once the light stops flashing, you're connected. To resolve your Wi-Fi issues, you may need to reset your printer's settings.