Hamat sqd3320 installation instruction

It sets all printing from each installed application to use the same driver settings as defined in a profile. The administrator must first make selections in the Profiles and Application Based Profile dialog boxes. The administrator can then ensure that all print jobs use those settings by locking this feature. Lock Security Settings If the Security Watermark plug-in is installed, the administrator must first make selections for the Security Watermark in the Advanced tab.

The administrator can then ensure that a security watermark is printed on all jobs by locking this feature. Selecting Lock Security Settings also prevents any user changes in the Security Watermark dialog box. Password settings User Guide Device Settings The administrator can also set a password that is required to temporarily unlock a feature. If selected, this setting prompts you to enter a password and confirm the password.

Locking Driver Settings You can select driver settings to lock, so that the settings are applied to all print jobs. Select the check box for each driver feature to be locked. Select the Password Settings check box if you wish to protect the settings with a password, otherwise skip to the next step. In the Password Settings dialog box, type a password of at least 4 but no more than 16 characters.

Retype the password in Confirm password, and click OK. To unlock the password, clear the Password Settings check box. In the Unlock Password dialog box, type the password, and click OK. When a password is set, the Unlock button appears in driver tabs where the locked features appear. To unlock a feature and change its settings temporarily, click Unlock and type the password. Authentication and privacy options are available by selecting Settings.

Apply to other models This option displays a list of installed printing systems to apply the selected SNMP settings. Authentication This option provides an algorithm to check that a transferred file has arrived intact. SHA1 This option produces a message digest that is bits long. SHA1 is the successor to MD5.

Privacy This option uses encryption for secure communication. It is available after you select the Authentication option.

You may select one privacy option. DES turns cleartext into ciphertext via an encryption algorithm. It encrypts and decrypts data using 8-byte blocks and a bit key. AES is a symmetric block cipher that can process data blocks of bits, using cipher keys with lengths of , , and bits.

It is more secure than DES. In the SNMPv3 dialog box, select from the available options. Optional: Under Apply to other models, you can click Select and choose from available models. The SNMP settings are applied to all selected models.

User Settings lets you specify user and department names, select the default unit of measure, and change the driver display language. Type your department or group name in Department text box.

You can type up to 31 characters in the User name and Department text boxes. Units You can set Inches or Millimeters as the unit of measurement. This is used for the following settings: Custom page size setting in the Page Sizes dialog box in the Basic tab. Spacing setting in the Watermark Add and Edit dialog boxes in the Advanced tab.

Poster settings and Gutter settings in the Layout tab. Selecting a Unit of Measurement You can select a unit for displaying measurements in the user interface.

Language Preference The Language preference option specifies the user interface language of Device Settings in Properties and all tabs of Printing Preferences. Available languages vary depending on your locale and your computer settings.

Setting Language Preference You can select a user interface language. After you select a PDL, the selection appears in the lower corner of the Preview image. In GDI compatible mode, vector graphics are rasterized for printing as bitmap images.

Use the GDI compatible mode option to improve the output quality of the graphic created by the application. This feature can be used as an alternative to existing commercial applications for creating PDF documents. For a document using mixed paper sizes, all pages in the PDF use the size of the first page. The duplex unit will be bypassed for the following types of print jobs: a one page document, one page from a multi-page document, or a multi-page document that prints onto a single sheet.

Selecting this option can reduce wear on the mechanical duplex unit, and result in comparatively faster printing times. PCL XL Settings Skip printing blank pages This option prevents the printing system from outputting any page that contains no data, or that has, at most, one space character.

Selecting this option can save paper, and result in comparatively faster printing times. This feature is for regular printing not for booklet, duplex or multiple pages per sheet. When selected, EMF spooling is not available in the Advanced tab.

See PDF topics for details. You can select the GDI compatible mode option to improve the output quality of graphics created by your application. This option ensures accurate reproduction but significantly increases the file size. Compress data This option enables flat compression for the generated PDF document. This option significantly reduces the file size. Additional compression options are available within Adobe Acrobat.

Security This option applies encryption to the PDF document. Click Settings for additional Security settings. See the next section for details. Print and save This option lets you print and save a document as a PDF file. Click Settings for additional Print and save settings. Security Settings This option lets you select an encryption level and create passwords for the generated PDF file.

The following security options are available: Encryption Encryption provides password protection so that a document cannot be opened or altered by unauthorized users 40 Bit This encryption option provides low level security for a PDF document. It is supported for earlier versions of Adobe Acrobat and Adobe Reader 3. It is supported for Adobe Acrobat and Adobe Reader 5. Passwords Select passwords for changing security settings and for opening a document.

Passwords are supported to a maximum of 16 characters in length. Require password to change security settings Type an Owner password. When a document with this password is opened in Adobe Reader, it cannot be printed or edited, and document data cannot be copied. Require password to open document Type a User password. The user password must be entered at the time the PDF document is opened. This password must be different from the owner password.

Save to file and print A PDF file is created, saved locally, and sent to print. After you select between these two options, you can choose the following option: Automatically save to default file A PDF file can be saved automatically as a default file to be used again.

You can then select from the following options: Replace default file This option replaces an existing file having the default file name KxPdf. Default file directory This option lets you browse to a location to save your PDF.

Click Settings. Click Settings, and select from print and save options. See the PDF Options topic for details. Click OK in all dialog boxes. Open and print the document. Name and save the PDF file. Compatibility Settings Compatibility Settings lets you specify media source values, override the application's Collate setting, and combine the Source and Media type lists in the Basic tab.

Media Source Enumeration Media source enumeration supports compatibility for media source values unique to the printer driver, such as those for cassettes or feeders. Your newly installed printer driver maintains identical media source support with the driver it replaces, whether for this driver or one from another manufacturer.

If media source macros exist for the older driver, then the alignment of media source values maintains support without the need to change the macros. If the values for a given media source differ between printer drivers, you can reassign an enumerated value to create a match between the drivers. The current value is listed in the Enumerated value box. Type an Enumerated value for the media source, and click Apply.

To align settings with a different driver, this value should align with those in the other driver. You can restore all the options in Compatibility Settings to the default by clicking Reset. Ignore Application Collation This option bypasses the Collate setting in software applications, and gives priority to the printer driver setting. With the check box selected, the printer driver Collate setting is used. With the check box cleared, the application Collate setting is used.

Selecting Printer Driver Collation You can ignore the collation setting in the application and use the printer driver collation setting. In the combined list, Media types are listed first, followed by cassettes and MP tray. Removing a Plug-in You can remove an installed plug-in from the driver. If removed, the plug-in features do not appear in the driver interface. Select a plug-in module from the list and click Delete, then Yes. Any Quick Print settings can be saved as a group, called a profile, and applied to any print job.

Profiles support common printing tasks. This chapter can be used as a separate Quick Print user guide when KX driver support is controlled by an administrator.

You can create your own customized view of print options with Edit Quick Print. And you can also select from profiles that have been set with predefined options for frequently run print jobs. Common Printing Options The upper section of the Quick Print tab has several icons that represent the most common options for print jobs.

Click on the Quick Print icons and check boxes to change settings for the print job. Some of these options also appear on the Basic, Layout, and Imaging tabs. Orientation This icon changes between portrait, landscape, portrait rotated, landscape rotated printing formats. The page ordering sequence can either be , , , or , , , and so on. Print on both sides This icon changes between duplex printing for flipping on the long edge, duplex printing for flipping on the short edge, or for not using duplex printing.

Multiple pages per sheet This icon changes between Off, 2, and 4 for the number of pages printed on one sheet. EcoPrint This icon changes the text and graphics to appear lighter in the printed job. EcoPrint does not increase print speed.

Edit Quick Print This button lets you select the print option icons to display and in what order when you access the Quick Print tab. Any basic print options can be Reset to the default values in the Quick Print tab. The following sections describe some of the Quick Print tab options in more detail. Collate, Duplex printing, and EcoPrint can also be found in the Basic and Imaging tabs, and Multiple pages per sheet in the Layout tab. The Profiles options are accessed from Printing Preferences.

Collate Collate specifies the order in which the pages of a multiple copy job are printed. With Collate selected, the first time the print job is sent to the printing system the data is rendered as page images in the printing system's memory. The remaining job copies are printed from the stored data. This avoids the extra processing involved in sending every copy from the computer to the printing system. With Collate selected, the driver prints the complete job set by set.

With Collate cleared, it prints each page by set. For example, with Collate selected, three copies of a five-page document outputs as pages one through five in succession, three times. The printer driver automatically overrides the application's Collate setting and uses the printer driver setting. You can use the application's Collate setting by clearing the Ignore application collation check box in the Compatibility Settings dialog box accessed from Device Settings.

Duplex Printing Duplex printing is printing on both sides of each page. Select Print on both sides to start duplex printing. The printing system contains a duplex unit that turns the paper over to allow printing on the reverse side. Print on both sides must be selected to print on both sides of the cover and insert pages.

Flip on long edge Turn the long edge of the page to view the content. Flip on short edge Turn the short edge of the page to view the content. The size and readability of the multiple pages decrease as the number of pages per sheet is increased. You can set the arrangement of the pages from the Layout tab as well as print borders around each of the pages. When Multiple pages per sheet is selected, Poster and Scaling are unavailable. Edit Quick Print The assortment of icons at the top of the Quick Print tab can be customized to include features that you use most often.

Any number of icons from 0 to 5 can be displayed. All icons can be removed from view if you want to use only the Profiles options in the Quick Print tab. Right-click on the desired printing system model and click Printing Preferences.

Select the Quick Print tab. To add a feature to the Quick Print tab, select the feature under Available controls, and click the right arrow to move the feature to Selected controls. A maximum of 5 features can appear under Selected controls. To remove a feature from the Quick Print tab, select the feature under Selected controls, and click the left arrow to move the feature to Available controls.

To use only the Profiles in the Quick Print tab, move all features to Available controls. Click the up and down arrows to change the position of the features under Selected controls. The feature at the top appears on the left in the Quick Print tab. To restore the list to factory default options, click Reset. In Profiles, you can save printer driver settings as a profile. You can select multiple options in any Printing Preferences tab, save them to a profile, and User Guide Quick Print use all of them at once when you apply the profile.

The profiles list always includes a Factory Default profile that returns the driver options to their default settings. The profiles can include Common Profiles, which are installed as optional components through the Printer Installation Wizard, and any custom profiles created. A maximum of 26 profiles can be established in one driver, including the Factory Default profile.

Settings made in Device Settings cannot be saved to a profile. Selecting a Profile You can select and apply a profile from the Quick Print tab or from the Profiles dialog box. Quick Print tab 1 2 3 1 2 3 4 From Profiles, select a profile. Click Apply. The side panel displays the options for that profile using an icon and a summary.

Profiles dialog box In any of the Printing Preferences tabs, click Profiles. In the Profiles dialog box, select a profile. The side panel displays the options for that profile. Saving a Profile The Save button lets you create your own profiles. You can select the printing options you want in the driver, then save the driver settings including your customizations as a profile. You can then use that profile to print the same type of print job again without having to reselect all the settings.

In Printing Preferences, the Profiles button appears at the bottom of all the tabs. To identify the profile, type a Name, select an Icon, and type a Description. Click OK to save the profile. The newly added profile appears in the Profiles dialog box. Note: To reset the printer driver to default settings, select the Factory Default profile, and click Apply.

This clears the settings of a selected profile. You can remove a profile by selecting it in the Select profile list and clicking Delete. Editing a Profile The Edit button lets you make changes to an existing profile. The Factory Default profile cannot be edited. In the Select profile section, select the profile to be edited, and click Edit. Any of the three options can be edited: name, icon and description. Click OK to save the edited changes.

The newly edited profile appears in the Profiles dialog box. Importing a Profile The Import button lets you import a copy of a profile from other printer drivers into your printer driver. Browse for the existing profile. KXP , select it, and click Open. A message appears if any of the profile settings in the imported file are unavailable in the existing driver. Select Yes, to import the profile, or No, to cancel the import.

Click Apply to use the selected profile for the current print job, or click OK to close the dialog box. Exporting a Profile The Export button lets you export a copy of a profile from your printer driver for use in other printer drivers. The Factory Default profile cannot be exported. In the Select profile section, select the profile to be exported, and click Export.

Name and save the profile. Click OK to close the Profiles dialog box. Application Based Printing An administrator can associate a profile with an application so that all printing from the application uses the same profile settings. This makes profiles easier to use and ensures consistent printing from an application. For example, a duplex printing profile can be applied to all spreadsheet printing to save paper, or reports in Microsoft Word can be set to print with consistent stapling and print quality.

Associations between profiles and applications can be created at any time in the Profiles dialog box. To use the associations in printing, the feature must be turned on in the Administrator Settings dialog box, accessed from Device Settings. A maximum of 25 associations can be created in the Application Based Printing dialog box, accessed from the Profiles dialog box. Adding an Association Once profiles have been created or imported, you can create an association between a profile and an application.

Then the application always prints using the associated profile settings. In the Add Association dialog box, enter a name for the association, to a maximum of 31 characters.

Under File name, enter a valid executable file name. EXE for an application that allows printing, or browse to find a file located on your computer.

Select a profile from the list. You can remove an association by selecting it and clicking Delete. Editing an Association You can change the name, file, and profile for an association.

In the Edit Association dialog box, change desired settings under Association name, File name, or Profile. Basic Settings The Basic tab contains several settings for the most commonly used printing tasks. Print size This setting sets the size of the area that the printer prints to, regardless of the actual paper size that is used by the printing system.

Source This setting specifies the cassette or tray that the printing system draws paper from. Unless you are using a custom paper type, you can leave it set to Auto source selection. Media type This setting selects the Source based on the types of media that are specified in the printing system. In general, you can leave it set to Unspecified.

Destination This setting specifies which output tray is used for the print job output. Page Sizes This setting should match the page size setting in your application. The printing result is based on the page size specified in this setting. You can also create a custom page size.

If Rotated is selected, the print job orientation is rotated degrees. Copies This setting specifies the number of copies to print. For collating multiple copies, select Collate. Duplex These settings enable printing on both sides of a sheet of paper. Quality This EcoPrint check box makes the entire image, text and graphics, appear lighter in the printed job.

This setting does not increase print speed. Print Preview This setting lets you view your document before printing. Note: Some applications may override print settings made in the driver. Usually the application can be set to follow the settings. Source and Media Types In the Basic tab, Source specifies which tray or cassette the printer uses for a printing job.

The default is Auto source selection, which instructs the printer to search for the media requested by the application or the printer driver. If the selected tray or cassette empties during a print job, then the printer searches for another source, and continues the job.

Media type instructs the printer to search for the type of paper or media that is requested by the application or the printer driver.

The choices shown may change depending on the selection in Source. If Auto media selection is selected, then the printer searches for another tray or cassette using the same media.

Transparencies, labels, and envelopes must be supplied from the MP tray. Ensure the paper is properly loaded by following the instructions outlined in the printing system's Operation Guide. Note: Source and Media type are separate items in the dialog box, but can be combined using the Combine source and media type lists setting in Compatibility Settings. If they are combined, Media type is not available on the Basic tab.

To use this setting, ensure that the Page Sizes setting matches the page size setting in your application. If the Print Size is different from the page size in your application, then each page is enlarged or reduced to match the Print Size.

The percentage value shown in brackets indicates the size of the Print Size setting relative to the Page Sizes setting. If the Page Sizes does not match the page size setting in the application the size of the original then, in most cases the Print Size is ignored and the document is printed based on its original size.

You can then save the custom setting to the Page Sizes and Print Size lists for later selection. Creating a Custom Page Size To use custom page sizes, they must be created and added to the Print size list. The driver supports a maximum of twenty custom sizes. Click New. A default custom name appears in the Name box. Type a name for your custom page size. Type or select values for the height and width. If the height or width value exceeds the allowable limit, it automatically adjusts to the limit after Apply or OK is clicked.

When done, click Apply. The custom page size appears in the Print size list, which is used for enlarging and reducing the sizes of prints. To delete a custom page size from the Page Sizes dialog box, select the name of the custom page size and click Delete. Printing with Custom Size Pages You can print on custom-sized pages.

In the Basic tab, select the name of your custom page size in the Print Size list. Click OK to return to the Print dialog box. Click OK to start printing. Duplex printing is printing on both sides of each page.

If it is not selected, then the printer prints on only one side of each page. The printer system contains a duplex unit that turns the paper over to allow printing on the reverse side.

Select either Flip on long edge or Flip on short edge. Collate specifies the order in which the pages of a multiple copy job are printed. Printing Collated Documents When printing multiple copies of a multiple page document, the printer can assemble the pages of each copy in numerical order.

Type or select the number of complete sets of the print job in the Copies box. The document page count must not exceed the printer tray capacity. The Quality feature, EcoPrint, changes toner saturation in the printed job, making the entire print image, including text and graphics, appear lighter.

The amount of toner varies based upon your printing system model and the type of data printed text, graphics, or both. EcoPrint is also available in the Quick Print and Imaging tabs. To enable this feature in the Basic tab, select the EcoPrint check box.

Print Preview After selecting driver settings, you can use Print preview to check the print job before you proceed with printing. If you are satisfied with the preview, you can print. Or you can cancel printing if you want to change driver settings.

Previewing a Print Job You can see a print preview before printing. In the Basic tab, select Print preview. When the Print preview dialog box appears: Click the arrow buttons to view document pages.

If you are satisfied with the preview, click the printer button to print the job. Click the logo to open the About dialog box that displays the driver version number and driver plug-in information. Click OK to close the driver information dialog boxes. Multiple Pages per Sheet Multiple pages per sheet prints several pages on a single sheet of paper for the purpose of reviewing the document and conserving paper.

Printing Multiple Pages per Sheet You can print several pages on a single sheet of paper. In Pages per sheet, select the number of pages to print on each sheet of paper. If you want to print a border around each page, select Print borders. In the Layout list, select the direction the pages should flow. Scaling increases or decreases text and graphics on a page. You can also select a gutter setting that enlarges the margins to accommodate stapling or hole punch.

Scaling is unavailable when Booklet, Poster or Multiple pages per sheet is selected. Setting Scaling on the Page You can increase or decrease text and graphics on a page. Type or select a percentage between 20 to Scaling adjusts proportionately the height and width of the page.

A lower percentage reduces the page and a higher percentage enlarges the page. A gutter creates additional blank space on the left side and at the top of the sheet. It is often used for binding, hole punch or stapling to make a print job easier to read. Increasing the measurements in Gutter increases the margins around your text and graphics on the left side, or top of the printed sheet.

This creates a larger margin space by shifting the printable area to the right, or down as much as one inch Creating a Gutter You can increase the margins on the left side and at the top of the printed sheet. In the Gutter width options, type or select a value between 0. Long edge left This selection modifies the outside margin on the left-side of the page.

Short edge top This selection modifies the outside margin on the top-edge of the page. Note: Availability of Gutter settings varies depending on Orientation and Duplex mode settings in the Basic tab. The text appears slightly reduced and away from the edge of the page. If text does not extend beyond the page when the gutter increases, clear Reduce image to fit. You can fold and bind the booklet in the center.

Folded booklets are half the size of the selected paper. When Booklet is selected, Multiple pages per sheet, Poster and Scaling are unavailable. A different paper source can be selected for the booklet cover. To include a cover on the booklet, select the Publishing tab, then select Cover mode.

Printing a Booklet You can print a booklet. Left edge binding This selection prints text that reads from left to right. Right edge binding This selection prints text that reads from right to left. The Poster feature lets you create a document to a size that is larger than the paper your printer can support. You can print a poster, or banner, up to 25 times larger than the original document. Segments of the poster document are printed on several sheets of paper and with the assistance of poster settings, you can reassemble the sheets easily to create a poster.

When Poster is selected, Booklet, Multiple pages per sheet and Scaling are unavailable. Use Sheets per page to select the poster size in relation to the original document size.

Each option shows the number of sheets to be printed and the maximum poster size. Note: The Sheets per page displays the unit of measurement in inches or millimeters.

These options print visual cues on the poster sheets that provide help in cropping and assembling the pages. Overlap edges This selection duplicates the edges of document data on adjoining sheets. Poster appearance is improved when the edges overlap slightly. Select the check box, then type or select a value between 0. This option reduces the final poster size slightly. Print crop marks This selection prints a border at the edges of each poster sheet. You can crop each sheet on the border before assembling the sheets.

This option ensures that data on adjoining sheets matches precisely. Print assembly marks This selection prints numbers at the edges of each sheet, matching numbers on adjoining sheets.

Assemble each sheet edge to the same numbered edge on another sheet. Use Print format to print a proof sheet, along with the poster, to guide you in assembling the printed poster sheets. Poster pages This selection prints all of the sheets to be assembled as a poster. Proof sheet This selection prints all the poster pages on one sheet with markings that display the sheet assembly.

Poster pages and proof sheet This selection prints all poster sheets and a one-page proof sheet. Printing a Poster You can print a poster. In Sheets per page, select the poster size. Each option describes the number of sheets it takes to represent one finished poster page. Click Poster Settings to select options in any combination. These options ensure a precise assembly of the pages to create the poster.

In Print format, select one of the options for a finished print format. Print Quality and Custom Quality Print quality lets you set the resolution for the print job. Resolution is a measurement, in dots per linear inch dpi , that describes the sharpness and clarity of printed text and images. Custom Quality lets you set a more refined resolution for the print job. The number of selections in Print quality depends on the number of resolutions supported by the printing system.

High quality, Proof, Draft Select one of these settings to print from the highest to the lowest print resolution. Selecting Custom without EcoPrint results in a default setting to the highest printing system resolution. Custom Quality opens a settings dialog box with selections for a more refined resolution: Resolution can be set to Fine , Fast unavailable for the PCL 5e PDL , dpi, or dpi.

Selecting EcoPrint EcoPrint changes toner saturation in the printed job, making the entire print image, including text and graphics, appear lighter. EcoPrint is also available in the Quick Print and Basic tabs. Click EcoPrint to open the EcoPrint dialog box. To start EcoPrint, select On; to stop it, select Off.

Click OK to close the EcoPrint dialog box. A computer font is a data file containing a set of glyphs visual representations of textual elements , characters, or symbols. Common terms for fonts are: Bitmap fonts define each character as a pattern of pixels the smallest resolvable rectangular areas of an image.

Such fonts are not easily scalable and distort when reduced or enlarged. Outline fonts, in contrast to bitmap fonts, are defined as a set of mathematical lines and curves.

An outline font is more easily scalable designed to display and print clearly at any point size than a bitmap font. Native fonts are the basic or original fonts installed with the computer operating system. TrueType fonts are the native fonts used by Microsoft Windows. TrueType fonts are a type of scalable outline fonts. TrueType has long been the most common format for fonts on Microsoft Windows.

System fonts are the primary fonts used by the operating system. They are typically accessed through an application interface or through a common font dialog box. Device fonts are stored either permanently or temporarily in the printing system memory.

The chosen method affects the speed and quality of the print job: Download as outlines This method is best suited for large documents or print jobs using multiple fonts and font sizes. Print speeds are faster because of the optimization features in this setting.

The repetition of similar font data sent to the printing system is reduced, thereby increasing the print speed. Print speed is not increased when using Asian fonts such as Japanese, Chinese, and Korean, because of the large amount of font information used for these particular fonts.

Allow native download User Guide Imaging This method improves text quality and increases print speed by converting TrueType fonts to Adobe Type 42 font format. Download as bitmaps Downloading fonts as bitmaps provides more detail, however it creates large file sizes.

This is best suited for print jobs with custom fonts, very small fonts point size , or Asian fonts. Substitute with device fonts System fonts and device fonts are automatically matched based on typeface name.

This function increases print speed and efficiency. It is useful for changing a font used throughout a large document, by replacing the old font with the desired font.

Note: GDI compatible mode does not support Substitute with device fonts. Font Substitution Font substitution is the process of using one font in place of another when the intended font is not available to a printing system.

Font substitution may be critical for output of documents to printing systems that are not well supported by a large font inventory. Setting Font Substitution You can use one font in place of another. In the Fonts Substitution dialog box, the System fonts list shows the fonts installed on your computer. The Available device fonts list shows the printing system fonts.

Click OK to save your settings. If the device font does not have similar font characteristics to the system font, character spacing in the document may appear incorrect. Select Disable device fonts to prevent substitution of device fonts for TrueType fonts. This option also improves portability of printable data. If cleared, device fonts may not match when sent to a different printing system.

Some Adobe applications have device font limitations. To overcome these limitations, select Disable device fonts. Graphics are pictorial representations of information.

Graphics can be functional charts, diagrams or artistic drawings, photographs. Graphics Settings let you select options for your printed graphics. Note: Some options are available only when a specific PDL is selected.

In the Graphics Settings dialog box, select from the available options, and then click OK to save your selections. Pattern Scaling Pattern scaling is a feature that can help improve visual compatibility between screen and print output. Graphics objects, such as a shape or a path, often include patterns and fills that are composed of collections of printed dots.

A pattern is a planned or random repetition of colors, shapes, lines, values, and textures to create a visual arrangement. A fill is the application of a color or grayscale to a graphics object. If printed patterns and fills do not match the appearance of that on the screen, use Pattern scaling to select a different density of printed dots. In the Imaging tab, click Graphics to open the Graphics settings dialog box and access the Pattern scaling settings.

Auto default setting This setting prints patterns and fills to match the on-screen appearance. Coarse This setting prints patterns and fills with the fewest number of lines, patterns, or dots. Medium User Guide Imaging This setting prints patterns and fills with a greater number of lines, patterns or dots than the Coarse setting. Fine This setting prints patterns and fills with the greatest number of lines, patterns, or dots. Printed patterns and fills may appear more dense than the on-screen appearance.

Inversion Settings Inversion is the opposite of the normal order, arrangement, or position of an image or printed content. In the Imaging tab, click Graphics to open the Graphics settings dialog box and access the Inversion options. Reverse image This setting prints images like a photo negative, reversing black and white areas of the image. Mirror print This setting prints the page content backwards, as it would appear in a mirror image.

Optimization Settings Optimization is a process or methodology of improving a printing system's function or effectiveness. Fast printing This setting increases print speed and decreases spool size. It delivers images in binary format. It can be used for most everyday printing needs. This feature increases print speed for documents printed from these applications by optimizing CIE data.

It has no effect on print jobs that do not use CIE data. CIE optimization should be selected for speed not accuracy, so printed output may be different from appearance on the screen. In the Imaging tab, click Graphics to open the Graphics settings dialog box and access the CIE optimization check box.

Halftone Screen Halftone Screen lets an experienced user print different shades of gray as are found in photographs. Shades are produced by printing dots of various sizes and shapes, and by spacing them closer or farther apart. Setting the Halftone Screen Halftone Screen provides a means to apply shades of gray to black and white printed output. Clear the Use printer's default screens check box. Set the available options to the desired values: Ink Lists the halftone screens available. For black and white printers, this option appears unavailable and is permanently set to Black.

Frequency Displays the number of rows of dots per inch or centimeter. Set the range from 2. Angle Sets the angle at which rows are aligned. Set the range from to degrees. Shape Select the shape of the halftone dot: Ellipse Resists optical jump. An optical jump occurs when an area of an image suddenly become darker. An ellipse shape provides a smooth gradation of tones. Select Ellipse for images with dark areas. The correct angles depend on the number of colors being printed. Select Round for images with light tints and highlighted areas.

Line Used for special effect. Select Line to change the effect by selecting a different angle. These settings are useful if graphic images are printing too light, too gray, or too dark. Text remains unaffected. A preview image in the Adjustment Settings dialog box illustrates any brightness and contrast changes. You can also change brightness by entering a numeric value in the text box at the right. Zero is the default mid-level setting. Adjusting brightness is useful when graphic images are printing too dark or too light.

A high contrast setting decreases the grayscale spectrum, making light grays lighter and dark grays darker. A low contrast setting increases the grayscale spectrum, making light grays darker and dark grays lighter. You can also change contrast by entering a numeric value in the text box at the right. Adjusting contrast is useful if graphic images are printing too gray, or too black and white. It produces faster printing of color text by reducing the amount of data sent to the printer.

In black and white printers, it increases the detail for light-colored text printed. White text and image colors are unaffected. Print graphics as black This option prints all color graphics with black, rather than grayscale.

This feature is intended for CAD applications. Cover Mode Cover mode lets you add cover pages for the front and back of your document. You can print on cover pages of a different weight or color than the main document. The source of the cover paper is specified by adjusting the Media for cover settings in the Publishing tab. Print on both sides must be selected in the Basic tab or Quick Print tab in order to print using the Front inside or Back outside options.

Although Cover mode and Page insert can be used simultaneously, they cannot be used with Transparency interleaving. Printing Covers You can choose cover pages for printing. Select Front or Front and back to specify the type of covers. Select from Print onto options if you want to print on the covers. Front Front outside Prints on the outside surface of the front cover.

Front Front inside Prints on the inside surface of the front cover. Front Front outside Front inside Prints on the outside and inside surfaces of the front cover. Front and back Front outside Prints on the outside surface of the front cover and inserts a blank back cover.

Front and back Front inside Prints on the inside surface of the front cover and inserts a blank back cover. Front and back Front outside Front inside Prints on both sides of the front cover and inserts a blank back cover.

Front and back Back outside Prints on the outside surface of the back cover and inserts a blank front cover. Front and back Back inside Back outside Prints on both sides of the back cover and inserts a blank front cover.

Front and back Front outside Front inside Back inside Back outside Prints on both sides of the front and back covers. Choosing Cover Media You can select media for the cover. In the Media for cover list, select the media type or source cassette for the front and back covers. When you choose the media type, a source cassette matching that media type is automatically selected. A Page insert is a preprinted page or a page of a different paper type that is inserted at specified points in a print job.

The inserted page can also be printed on during the print job. Both sides of the page insert can be printed on by using the duplex unit. Printing Page Inserts Several ways are available to arrange page inserts: you can print on one or both sides or insert a blank sheet. To print on both the front and back of the inserted page, select the Print onto front and Print onto back check boxes.

In Insert before pages, type the page number to insert. A page is inserted between the page number you typed and the page before it. From the Media for page list, select the media type of the inserted page or the source paper cassette. Page insert Print onto front Prints on the front side of the inserted page. Page insert Print onto back Prints on the back side of the inserted page. Page insert Print onto front Print onto back Prints on both sides of the inserted page.

Transparency Interleaving Transparency interleaving inserts a backing sheet between printed transparencies. The backing sheet, also known as an interleaf, helps keep transparencies clean and prevents them from clinging together. You can print the same content on the backing pages as on the transparencies. Transparency interleaving cannot be used together with Cover mode or Page insert. Interleaving Transparencies You can insert backing sheets between transparencies.

Instead, in the Source list select Auto Transparency. To print the transparency content on the inserted pages also, select the Print onto backing check box.

In the Media for backing list, select the Media type of the backing sheet or the Source paper cassette. The printing system's operation panel prompts you to load transparencies into the MP tray, and if necessary, load backing paper into the selected cassette.

A command file is a set of instructions the printing system interprets to produce a given output. To create this file, use a text editor like Windows Notepad. If no file names are visible in the list, you must click Add to browse for files on your computer or network to add to the list. After the file is selected, insertion point options become available. After your text editor opens, make your changes to the file.

Save the file and exit. Note: Editing and saving a command file replaces the contents of the existing local or network file. In the delete confirmation box, click Yes to accept. Note: Only the file name is removed from the command file list. The file itself is not deleted, but remains on the network or local computer. Featuring sinks for classroom, washroom, cafeteria and janitorial applications. Products include paper towel dispensers, waste bins, soap dispensers, among others.

Choose Franke Commercial products for new school builds or retrofit projects. Franke Commercial Division 10 washroom accessories are designed specifically for the commercial sector.

Products include paper towel dispensers, waste bins, soap dispensers, toilet paper dispensers, grab bars, and a variety of hands-free accessories. Welcome your employees, customers, clients, and the public back into your facility safely with Franke touchless products and accessories. Discover Franke's hands-free stainless steel sanitizer dispensers and sanitizer stands. The ultimate in flexibility, place them in entrances, hallways, and common areas.

Franke sanitizer stands bring elegance and hand hygiene together. Customizable stand-alone hand wash stations. Solid stainless steel construction for demanding, high-traffic environments. Designed for public spaces where increased capacity is needed for hand hygiene. Stainless Steel Hand Wash Sinks available for quick ship. Ideal for healthcare projects with quick turnaround such as field hospitals or ward retrofits. While quantities last, call customer service for more information. Use this helpful guide to design your custom stainless steel sink.

Check the boxes, add your notes and submit for your custom quotation. Read the test reports on ozone's efficacy against hospital acquired infections. Franke's EZ Torque installation clamps come pre-installed from the factory on all topmount single, double and triple bowl sinks.

Guide to faucet hole drilling locations for single, double or triple topmount sinks or classroom sinks. The Do's and Don'ts of caring for your Franke stainless steel product. How to order pre-installation kits, complete kits or glass filler kits. See the complete range of Franke drinking fountains at a glance.

Print this poster at full size for a quick reference guide when comparing models. Monday - Thursday. Discover the complete product overview subdivided into applications, products, and design lines. Product Explorer. Commercial Systems Brochures and Catalogues. Literature Welcome to the download area of Franke Commercial Products.